Apevia ATX-SL750W Soul 750W Fully Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
If you are evaluating apevia atx sl750w soul 750w fully alternatives, the original unit serves as a functional baseline for mid-range systems. The Apevia Soul 750W provides 750 watts of power with fully modular cables, DC-to-DC conversion, Active PFC, and a 140mm cooling fan. It fits standard ATX cases and supplies traditional 6+2-pin PCIe connectors alongside short-circuit, over-voltage, under-voltage, and over-power protections.
You might consider an alternative if your build requires different specifications, higher efficiency certifications, or updated connectivity. Modern hardware often benefits from ATX 3.0 or ATX 3.1 compliance, dedicated 12V-2x6 PCIe 5.1 connectors, or official 80 Plus Bronze, Gold, or Platinum ratings. Other setups may require higher capacities like 850W or 1200W, a fixed-cable layout, or a 10-year warranty. The 6 options featured below were chosen because their specifications overlap with the original design, helping you find matching dimensions, modular layouts, or shared output levels for your configuration.
Our top pick: Apevia Soul 750W Fully Modular PSU.
How Each Alternative Compares
GamePower 750W Bronze ATX Power Supply
The GamePower 750W provides an 80 Plus Bronze efficiency rating that the Apevia Soul 750W does not specify. Both units supply 750 watts of power with Active PFC support. However, this GamePower unit gives up the fully modular cable design of the Soul 750W, meaning you must manage fixed internal wiring inside your chassis. It also weighs less at 1.1 pounds compared to the Soul's 4.5 pounds, while maintaining a similar physical footprint at 6.3 inches in length. Choose the GamePower 750W if your build requires certified 80 Plus Bronze efficiency at 750W and you do not mind non-modular cabling.
Apevia Mystic 1200W Platinum Modular PSU
The Apevia Mystic 1200W expands significantly on the Soul 750W by delivering 1200 watts, an 80 Plus Platinum efficiency rating, and ATX 3.0 compliance with PCIe 5.0 connectivity. It also incorporates Japanese capacitors while retaining a fully modular design. In exchange, the Mystic demands considerably more case space, measuring 11 inches long compared to the 6.2-inch Soul 750W. It also exceeds the power needs of standard mid-range builds that only require standard 6+2-pin PCIe connectors. You should select the Mystic 1200W if you run high-draw hardware requiring ATX 3.0 power delivery, top-tier Platinum efficiency, and higher continuous wattage reserves.
Apevia Galaxy 1200W Gold ATX 3.0 Power Supply
The Apevia Galaxy 1200W increases output by 450 watts over the Soul 750W, offering 1200W total capacity alongside an 80 Plus Gold efficiency certification. It adds modern ATX 3.0 architecture and PCIe 5.0 graphics support while matching the Soul's fully modular layout and Active PFC. What you give up is compact sizing, as the Galaxy chassis measures 11 inches long, compared to 6.2 inches on the Soul 750W. This larger size makes it unsuitable for standard, tighter ATX enclosures. Pick the Galaxy 1200W if you need substantial wattage overhead and native PCIe 5.0 compatibility for power-heavy graphics cards rather than standard 750W delivery.
ASRock Phantom Gaming 750W ATX 3.1 Power Supply
The ASRock Phantom Gaming 750W upgrades the Soul 750W formula with 80 Plus Gold efficiency and modern ATX 3.1 compliance. It includes a native 12V-2x6 connector for PCIe 5.1 components, which the Soul lacks with its traditional 6+2-pin cables. It also features a slightly shorter 5.91-inch depth compared to the Soul's 6.2-inch chassis. However, it is heavier at 7.5 pounds compared to 4.5 pounds, and it does not use a 140mm fan. Both provide 750 watts and fully modular wiring. Choose the Phantom Gaming 750W if you need updated ATX 3.1 power standards and a dedicated 12V-2x6 connection for modern graphics hardware.
Apevia Galaxy 750W Gold ATX 3.1 Power Supply
The Apevia Galaxy 750W shares the 750W capacity, fully modular design, and 6.2-inch depth of the Soul 750W, but it introduces 80 Plus Gold efficiency and Japanese capacitors. It also upgrades platform architecture to the newer ATX 3.1 and PCIe 5.1 specifications. In contrast, the Soul 750W focuses on traditional 6+2-pin PCIe connectors without ATX 3.1 labeling. The Galaxy 750W weighs 4.6 pounds, which is nearly identical to the Soul's 4.5-pound frame. Pick the Galaxy 750W if you want the exact same dimensions and brand ecosystem as the Soul 750W, but require higher certified efficiency and updated PCIe 5.1 hardware compatibility.
MSI MAG 850W Fully Modular ATX Power Supply
The MSI MAG 850W brings 850 watts of output, giving you 100 watts more headroom than the Soul 750W. It upgrades efficiency to 80 Plus Gold and supports ATX 3.1 and PCIe 5.1 with an integrated 12V-2x6 connector. It also includes a 10-year warranty, a metric not stated for the Soul. However, the MSI unit requires substantially more internal room, with an enclosure depth of 12 inches compared to the Soul's compact 6.2 inches. Choose the MSI MAG 850W if your setup benefits from 850W capacity, extended 10-year warranty coverage, and native 12V-2x6 power connections in a spacious computer chassis.
Quick picks
Our 7 picks
Apevia Soul 750W Fully Modular PSU
Best for: standard mid-range PC builds needing modular cables
- Wattage
- 750W
- Modularity
- Fully Modular
- PCIe Connector Type
- 6+2Pin
- Fan Size
- 140mm
- Form Factor
- ATX
- Recommended Use
- Gaming
The Apevia Soul 750W is an ATX power supply featuring a fully modular cable design, a 140mm thermally controlled fan, and DC-to-DC converters with active PFC. It provides dedicated 6+2-pin PCIe power connectors and full bridge 12V synchronous rectification in a standard 158mm casing. This unit suits you if you build a standard mid-range gaming desktop and want modular cabling to eliminate unneeded interior case wires.
Pros
- Fully modular cabling allows connecting only needed wires
- Thermally controlled 140mm cooling fan
- DC-to-DC converter design with active PFC
- Short-circuit, over-voltage, over-power, and under-voltage protections
Cons
- No official 80 Plus efficiency certification listed in specs
- No native 16-pin PCIe 5.0 or 12VHPWR connector included
Good fit if
- You need a fully modular 750W supply to minimize internal cable clutter.
- You run a graphics card powered by traditional 6-pin or 8-pin PCIe cables.
- You want a cooling setup built around a 140mm fan.
Skip if
- You need native ATX 3.0 or PCIe 5.0 power connectors for newer graphics cards.
- You require a documented 80 Plus Gold or Platinum efficiency rating.
Verdict: Apevia Soul 750W Fully Modular PSU delivers 750 watts with detachable cables for mid-range gaming setups using traditional 8-pin PCIe hardware. Its DC-to-DC topology and 140mm fan offer standard baseline functionality for typical ATX cases.
GamePower 750W Bronze ATX Power Supply
Best for: standard 750W desktop and gaming builds
- Wattage
- 750W
- Efficiency Rating
- 80 Plus Bronze
- Fan Size
- 140mm
- Form Factor
- ATX
- Recommended Use
- Gaming
- Power Factor Correction
- Active PFC
The GamePower 750W 80 Plus Bronze Power Supply provides 750 watts of output for gaming and workstation builds. It features an 80 Plus Bronze rating for up to 85 percent efficiency, active PFC, and a single +12V rail. A 140mm fan provides internal cooling, while flat black cables simplify routing. It suits your build if you need reliable 750-watt delivery with standard efficiency specs.
Pros
- 750-watt power output with active PFC
- 80 Plus Bronze certification reaching up to 85% efficiency
- Large 140mm cooling fan
- Single +12V rail design
Cons
- Lower efficiency rating than Gold or Platinum alternatives
- No modular cabling specified in product data
Good fit if
- You need 750 watts of power for gaming or intensive PC tasks.
- You prefer a 140mm cooling fan for thermal management.
- You want flat black cables for straightforward routing.
Skip if
- You require 80 Plus Gold or higher efficiency ratings.
- You need a fully modular cable design to remove unused wires.
Verdict: GamePower 750W 80 Plus Bronze Power Supply delivers steady 750-watt performance with a 140mm fan and standard Bronze efficiency. It fits desktop builders looking for core power specs without modular wiring.
Apevia Mystic 1200W Platinum Modular PSU
Best for: high-wattage PCIe 5.0 gaming builds
- Wattage
- 1200W
- Efficiency Rating
- 80+ Platinum Certified
- Modularity
- Fully Modular
- ATX Version
- ATX 3.0
- PCIe Connector Type
- 12VHPWR, 6+2 pin
- Fan Size
- 135mm
The Apevia Mystic is a 1200W fully modular power supply built for high-demand setups. It features 80 Plus Platinum efficiency, native ATX 3.0 compliance, and a dedicated 16-pin 12VHPWR connector for PCIe 5.0 graphics cards. Inside, it uses 100 percent Japanese electrolytic capacitors and an auto-thermally controlled 135mm RGB fan. You get substantial overhead and modern cabling if you run multi-core processors with high-wattage graphics cards.
Pros
- 80 Plus Platinum efficiency certification
- Native ATX 3.0 support with 16-pin 12VHPWR PCIe 5.0 connector
- 100% Japanese electrolytic capacitors
- 135mm auto-thermal fan with 366 RGB modes
Cons
- Provides only six SATA power connectors
- No over-temperature protection listed in specifications
- No software control interface listed for RGB adjustment
Good fit if
- You need 1200W of total capacity for high-draw hardware.
- You want 80 Plus Platinum efficiency and fully modular cabling.
- You require a native 12VHPWR cable for an ATX 3.0 graphics card.
Skip if
- You only need a standard 750W unit for mid-range components.
- You require more than six SATA power connectors for storage drives.
- You prefer an unlighted fan for a blackout PC build.
Verdict: Apevia Mystic 1200W Platinum Modular PSU delivers high-wattage ATX 3.0 power and 80 Plus Platinum efficiency for demanding systems. It provides modern PCIe 5.0 power delivery and Japanese capacitors for builds requiring large wattage reserves.
Apevia Galaxy 1200W Gold ATX 3.0 Power Supply
Best for: High-wattage builds needing ATX 3.0 connectivity
- Wattage
- 1200W
- Efficiency Rating
- 80+ Gold Certified
- Modularity
- Fully Modular
- ATX Version
- ATX 3.0
- PCIe Connector Type
- 12VHPWR, 6+2 pin
- Fan Size
- 135mm
View on Amazon: Apevia Galaxy 1200W Gold ATX 3.0 Power Supply
This power supply provides 1200 watts of power with 80 Plus Gold efficiency and fully modular cabling. It complies with ATX 3.0 standards and includes a dedicated 16-pin PCIe 5.0 12VHPWR connector for modern graphics cards. Inside, it uses Japanese electrolytic capacitors cooled by a 135mm fan. It suits you if you need significantly higher wattage and updated power delivery compared to standard 750W units.
Pros
- 1200W continuous output with 80 Plus Gold efficiency
- Native ATX 3.0 compliance with 16-pin 12VHPWR connector
- Fully modular cable configuration
- 100% Japanese electrolytic capacitors
- Auto-thermally controlled 135mm FDM bearing fan
Cons
- Over-temperature protection is not listed in the specifications
- Provides only two standard 8-pin to 6+2-pin PCIe cables
Good fit if
- You need 1200W of power for high-draw hardware.
- You want ATX 3.0 support with a native 12VHPWR cable.
- You prefer a fully modular layout with Japanese capacitors.
Skip if
- You only need a base 750W capacity for your build.
- You require explicit over-temperature protection listed.
Verdict: Apevia Galaxy 1200W Gold Power Supply delivers heavy-duty 1200W output and ATX 3.0 compliance for power-hungry hardware. It gives you modern PCIe 5.0 connectivity and modular cabling while exceeding typical 750W capacity requirements.
ASRock Phantom Gaming 750W ATX 3.1 Power Supply
Best for: modern PCIe 5.1 gaming systems needing 750W
- Wattage
- 750W
- Efficiency Rating
- 80 PLUS Gold, Cybenetics Platinum
- Modularity
- Fully Modular
- ATX Version
- ATX 3.1
- PCIe Connector Type
- 12V-2x6
- Warranty
- 10 Years
View on Amazon: ASRock Phantom Gaming 750W ATX 3.1 Power Supply
The ASRock Phantom Gaming 750W is an ATX 3.1 power supply built for modern gaming hardware. It delivers 750W of power with 80 PLUS Gold efficiency and Cybenetics Platinum certification. You get fully modular individually braided cables and a 90-degree 12V-2x6 PCIe 5.1 cable with an integrated NTC sensor. This unit suits you if you build standard ATX rigs with modern graphics cards.
Pros
- ATX 3.1 ready with a 90-degree 12V-2x6 PCIe 5.1 connector
- 80 PLUS Gold and Cybenetics Platinum efficiency ratings
- Fully modular cabling with individually braided patterns
- 10-year global warranty coverage
Cons
- Not compatible with all built-in computers or proprietary pre-built systems
- 750W capacity limits headroom for heavy multi-GPU or extreme-wattage setups
Good fit if
- You need native PCIe 5.1 power delivery with a right-angle 12V-2x6 cable.
- You want fully modular braided cables and a 10-year warranty.
Skip if
- You have a proprietary pre-built computer that rejects standard ATX power units.
- You run high-draw hardware requiring more than 750W total output.
Verdict: ASRock Phantom Gaming 750W ATX 3.1 PSU provides modern PCIe 5.1 power delivery and high efficiency inside a compact ATX enclosure. It serves as a dependable choice for standard gaming desktops that require clean modular cabling.
Apevia Galaxy 750W Gold ATX 3.1 Power Supply
Best for: modern PCIe 5.1 gaming PC builds
- Wattage
- 750W
- Efficiency Rating
- 80+ Gold
- Modularity
- Fully Modular
- ATX Version
- ATX 3.1
- PCIe Connector Type
- 12VHPWR
- Fan Size
- 135mm
View on Amazon: Apevia Galaxy 750W Gold ATX 3.1 Power Supply
The Apevia Galaxy 750W is an ATX 3.1 power supply built for modern gaming systems. You get an 80 Plus Gold efficiency rating, a native 16-pin 12VHPWR PCIe 5.1 connector, and fully modular flat cabling. Internally, it features all-Japanese capacitors, DC-to-DC conversion, and a 135mm fluid dynamic bearing fan for cooling. It suits you if you need updated ATX 3.1 compliance and dedicated PCIe 5.1 power delivery for a 750W graphics build.
Pros
- ATX 3.1 compliance with native 16-pin 12VHPWR PCIe 5.1 connector
- 80 Plus Gold efficiency rating
- 100% Japanese capacitors with DC-to-DC conversion
- 135mm fluid dynamic bearing fan
Cons
- 6.2-inch depth is longer than standard compact 140mm ATX units
- No zero-RPM fan stop mode listed in specifications
Good fit if
- You need native 12VHPWR power delivery for a modern PCIe 5.1 GPU.
- You want 80 Plus Gold efficiency with Japanese internal capacitors.
- You prefer detachable flat modular cables to streamline routing.
Skip if
- You require more than 750W of power headroom for high-draw hardware.
- You have a small PC chassis that cannot accommodate a 6.2-inch PSU length.
Verdict: Apevia Galaxy 750W Gold ATX 3.1 PSU delivers modern PCIe 5.1 connectivity and 80 Plus Gold efficiency with fully modular cabling. It is a capable choice if you need updated ATX 3.1 standards and reliable Japanese capacitors.
MSI MAG 850W Fully Modular ATX Power Supply
Best for: builders wanting a 10-year warranty and 850W
- Wattage
- 850W
- Efficiency Rating
- 80+ Gold
- Modularity
- Fully Modular
- ATX Version
- ATX 3.1
- PCIe Connector Type
- 12V-2x6
- Warranty
- 10 Year
The MSI MAG 850W Gold Fully Modular PSU provides an upgrade in wattage and modern standards compared to baseline 750W units. It delivers 850W of power with 80 Plus Gold efficiency and full cable modularity. With ATX 3.1 compliance and a native 12V-2x6 connector, this unit suits your gaming build if you want extra power headroom, current hardware compatibility, and long-term coverage backed by a 10-year warranty.
Pros
- 10-year warranty coverage
- ATX 3.1 and PCIe 5.1 support with native 12V-2x6 connector
- 80 Plus Gold efficiency rating
- Fully modular cable configuration
- 850W output capacity
Cons
- Higher 850W capacity than baseline 750W models
- 12-inch package length listed in specifications
Good fit if
- You want a power supply backed by a 10-year warranty.
- You need native 12V-2x6 PCIe 5.1 support for modern hardware.
- You prefer an 850W fully modular configuration.
Skip if
- You only require a standard 750W power supply.
- You do not need ATX 3.1 or 12V-2x6 connectors.
Verdict: MSI MAG 850W Gold Fully Modular PSU pairs 850W of 80 Plus Gold power with ATX 3.1 support and a native 12V-2x6 connector. It delivers current standard support backed by a 10-year warranty.
Specifications side by side
| Spec | Apevia Soul 750W Fully Modular PSU | GamePower 750W Bronze ATX Power Supply | Apevia Mystic 1200W Platinum Modular PSU | Apevia Galaxy 1200W Gold ATX 3.0 Power Supply | ASRock Phantom Gaming 750W ATX 3.1 Power Supply | Apevia Galaxy 750W Gold ATX 3.1 Power Supply | MSI MAG 850W Fully Modular ATX Power Supply |
|---|---|---|---|---|---|---|---|
| Wattage | 750W | 750W | 1200W | 1200W | 750W | 750W | 850W |
| Efficiency Rating | not specified | 80 Plus Bronze | 80+ Platinum Certified | 80+ Gold Certified | 80 PLUS Gold, Cybenetics Platinum | 80+ Gold | 80+ Gold |
| Modularity | Fully Modular | not specified | Fully Modular | Fully Modular | Fully Modular | Fully Modular | Fully Modular |
| ATX Version | not specified | not specified | ATX 3.0 | ATX 3.0 | ATX 3.1 | ATX 3.1 | ATX 3.1 |
| PCIe Connector Type | 6+2Pin | not specified | 12VHPWR, 6+2 pin | 12VHPWR, 6+2 pin | 12V-2x6 | 12VHPWR | 12V-2x6 |
| Fan Size | 140mm | 140mm | 135mm | 135mm | not specified | 135mm | not specified |
| Warranty | not specified | not specified | not specified | not specified | 10 Years | not specified | 10 Year |
| Form Factor | ATX | ATX | ATX | ATX | ATX | ATX | ATX |
| PCIe Version | not specified | not specified | not specified | not specified | not specified | PCIe 5.1 | PCIe 5.1 |
| Recommended Use | Gaming | Gaming | Gaming | Gaming | Gaming | Gaming | Gaming |
| Connector | not specified | not specified | not specified | not specified | 12V-2x6 Connector | not specified | 12V-2x6 Connector |
| Power Factor Correction | Active PFC | Active PFC | Active PFC | Active PFC | not specified | not specified | not specified |
| Size | 750W | 750W | 1200W ATX 3.0 & PCIe 5.0 Fully Modular Platinum | 1200W PCIe 5.0 | 750W | 750W | 850W (PCIE 5) |
| Dimensions | 6.2 × 5.9 × 3.4 inches | 6.3 × 5.91 × 3.39 inches | 11 × 7.5 × 4.5 inches | 11 × 7.5 × 4.5 inches | 5.91 × 5.91 × 3.39 inches | 6.2 × 5.9 × 3.4 inches | 12 × 8.75 × 4.92 inches |
| Weight | 4.5 pounds | 1.1 pounds | not specified | not specified | 7.5 pounds | 4.6 pounds | not specified |
| Color | Black | black | not specified | not specified | not specified | not specified | not specified |
| Model | ATX-SL750W | GP-750 | ATX-MT1200W ATX3.0 PCIE5 | ATX-GX1200W ATX3.0 PCIE5 | 90-UXP075-GFUAAB | GALAXY750W | not specified |
Frequently asked questions
Which alternatives support the ATX 3.1 standard?
You can choose the ASRock Phantom Gaming 750W, Apevia Galaxy 750W Gold, or MSI MAG 850W if you need ATX 3.1 support. These power supplies offer updated ATX 3.1 compatibility for modern hardware requirements. Both the ASRock unit and the MSI MAG include dedicated 12V-2x6 connectors, while all three models feature 80 Plus Gold efficiency and fully modular cabling designs.
What higher wattage options are available if 750W is not enough?
You can consider the MSI MAG 850W if you need a moderate step up in wattage. For significantly more capacity, the Apevia Mystic 1200W and Apevia Galaxy 1200W provide high-output options. The Mystic 1200W features 80 Plus Platinum efficiency and Japanese capacitors, whereas the Galaxy 1200W provides 80 Plus Gold efficiency. All three models include fully modular cables and Active PFC.
Which 750W alternatives have an 80 Plus Gold efficiency rating?
Both the ASRock Phantom Gaming 750W and the Apevia Galaxy 750W carry an 80 Plus Gold efficiency rating. This level indicates higher electrical efficiency under typical loads compared to standard ratings. In addition to Gold-rated efficiency, both units provide ATX 3.1 support, fully modular cable setups, and Active PFC to ensure steady power delivery inside your desktop build.
Which power supply alternatives feature a native 12V-2x6 connector?
The ASRock Phantom Gaming 750W and the MSI MAG 850W both feature a native 12V-2x6 connector. This connector type aligns with ATX 3.1 standards to deliver high wattage directly to compatible modern graphics cards without separate adapter splitters. Both models are fully modular, so you can connect the 12V-2x6 cable only when your graphics card requires it.
Which power supply on this list offers the highest efficiency rating?
The Apevia Mystic 1200W provides the highest efficiency among the listed alternatives with its 80 Plus Platinum rating. Platinum certification designates lower thermal waste and higher power conversion efficiency than Gold or Bronze units. This specific power supply also supplies 1200 watts of output, fully modular cabling, Japanese capacitors, and ATX 3.0 compliance for systems that demand high energy throughput.
How do the dimensions of the ASRock Phantom Gaming 750W compare to the Apevia Soul 750W?
The ASRock Phantom Gaming 750W has a shorter chassis length than the Apevia Soul 750W. The ASRock model measures 5.91 inches wide, 3.39 inches high, and 5.91 inches long. In comparison, the Apevia Soul 750W measures 5.9 inches wide, 3.4 inches high, and 6.2 inches long. The shorter 5.91-inch length of the ASRock unit leaves more space for cable management in compact ATX cases.
Which power supply alternatives feature Japanese capacitors?
The Apevia Mystic 1200W Platinum and the Apevia Galaxy 750W Gold explicitly list Japanese capacitors in their specifications. Both units feature fully modular cables and Active PFC. The Mystic model offers 1200 watts of output with 80 Plus Platinum efficiency and ATX 3.0 compliance, while the Galaxy 750W provides 750 watts with 80 Plus Gold efficiency and updated ATX 3.1 support.