Apevia ITX-AP300W 300W ITX ATX Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This apevia itx ap300w 300w itx atx review covers a compact power solution for small form factor builds. The unit delivers 300W of stable output, making it suitable for low-power systems. Its defining feature is the 40mm fan, which keeps noise levels manageable. The dimensions are 5.91 x 3.21 x 1.59 inches, allowing it to fit into standard Mini-ITX, Flex-ATX, and 1U cases. This size makes it ideal for HTPCs and compact servers where space is at a premium.
What stands out
- 300W reliable output for compact builds
- 40mm double ball-bearing fan with thermal control
- Separable 20+4 and 4+4 connectors for legacy support
- Full safety suite including OVP, OCP, and SCP
Who it fits
Good fit for
This unit suits users building small form factor PCs, such as HTPCs or POS systems. It fits well in Mini-ITX and Flex-ATX cases. The separable connectors help those using older motherboards. The included SATA and Molex ports handle internal drives and fans. It is a practical choice for compact servers needing stable, low-wattage power without taking up much room.
Who should skip it
You should look elsewhere if you need high wattage for gaming rigs. This 300W limit is too low for modern discrete graphics cards. The manual voltage switch requires you to toggle it to 230V for international use, which is inconvenient. The lack of modular cables means you must manage unused connectors. Users seeking silent operation might find the 40mm fan too small for optimal airflow.
Verdict: The Apevia ITX-AP300W is a spec-driven choice for low-power small form factor builds. It offers essential connectivity and safety features in a tight footprint.
Key specs explained for this unit
Wattage: 300W
This rating defines the total power the unit can deliver to your components. You need this level of output for low-power systems like basic office PCs or light media centers. It is not sufficient for high-end gaming rigs with powerful graphics cards. When shopping, ensure your total system draw stays below this limit to avoid instability or shutdowns during heavy loads.
Fan Size: 40mm
The cooling system uses a small 40mm fan with double ball bearings. This compact size is necessary to fit inside tiny ITX cases. The thermal speed control adjusts noise based on heat. You benefit from reliable airflow in confined spaces where larger fans cannot fit. Compare this with standard 120mm fans found in larger towers, which offer different noise and airflow profiles.
Dimensions: 5.91 x 3.21 x 1.59 inches
These precise measurements confirm compatibility with standard Mini-ITX, Flex-ATX, and 1U cases. You must check your case internal space before buying to ensure it fits. This form factor is critical for HTPCs and compact servers. When comparing options, verify that your chassis supports these exact external dimensions to avoid installation issues or physical interference with other components.
Input Voltage: 115V/230V Manual Switch
A physical switch on the unit lets you select between 115V and 230V input. It is preset to 115V for North America. If you live in a region with higher voltage, you must manually toggle this switch. Failing to do so can damage the unit. This feature ensures safe operation globally but requires user attention during setup compared to auto-switching models.
Connectors: 20/24-pin Main, 8-pin CPU
The main power cable separates into 20+4 pins, and the CPU cable splits into 4+4 pins. This design supports both modern and legacy motherboards. You get flexibility when building with older hardware or specific compact boards. When shopping, check your motherboard manual to confirm it accepts these standard connector types for reliable power delivery to the system core.
Design and Build Details
The listing describes this unit as built for standard Mini-ITX, Flex-ATX, and 1U cases. Its physical dimensions are 5.91 inches in length, 3.21 inches in height, and 1.59 inches in width. This compact form factor allows it to fit into tight spaces like HTPCs, POS systems, and compact servers. You must ensure your chassis supports these specific SFF dimensions. The listing does not provide weight data, so you should check your case capacity limits independently.
Connectivity is straightforward. It includes one 20/24-pin main connector and one 8-pin (4+4) CPU connector. Both are separable, meaning you can use the 20+4 and 4+4 configurations for legacy motherboards. It also provides two SATA and two Molex ports for drives and fans. The listing notes that the unit requires full connection to the motherboard to power on; it will not spin if connected only to a wall outlet. This is a critical operational detail for your build.
Cooling is handled by a 40mm double ball-bearing fan with thermal speed control. This choice helps keep noise levels low during light loads. For voltage selection, there is a manual switch. It is factory-preset to 115V for North American outlets. If you are using higher voltage regions, you must manually toggle this to 230V. The listing confirms it includes OVP, OCP, and SCP for system protection. The finish and internal materials are not detailed in the provided data.
Setup And Daily Use Guide
Setting up this power supply requires attention to regional voltage. The unit arrives with the manual selector switch preset to 115V. If you live in North America, you can install it immediately. If you are in a region with 230V outlets, you must manually toggle the switch before powering on. Failing to do so risks damage. The unit will not spin if connected only to a wall outlet. It requires a full connection to the motherboard to start. This is a standard safety feature for this form factor.
Connectivity is straightforward. You plug in the 24-pin main power and the 8-pin CPU connector. Both cables are separable. You can split them into 20+4 and 4+4 configurations. This allows compatibility with both modern and older motherboards. You also have two SATA and two Molex connectors for drives and fans. This covers basic internal storage and cooling needs.
Daily operation is quiet and stable. The 40mm double ball-bearing fan uses thermal speed control. It adjusts based on internal temperature. This keeps noise levels low during light tasks. The unit provides 300W of output. This is sufficient for low-power systems like HTPCs or basic office PCs. It is not meant for high-end gaming rigs. Safety features like OVP, OCP, and SCP protect your components. You get reliable power for compact builds without excessive heat or noise.
Before You Buy This PSU
When you own this Apevia unit, you need to verify your case dimensions carefully. It fits standard Mini-ITX, Flex-ATX, and 1U chassis, but tight clearances can cause installation issues. Check that your motherboard supports the included 20/24-pin and 8-pin CPU connectors. Both are separable, which helps with legacy boards, but modern setups require full connection for the unit to spin up. You must also ensure your system does not exceed 300W. This limit excludes high-end graphics cards. If you plan to add multiple drives, the two SATA and two Molex ports may fill up quickly. You might need external adapters or a hub for additional storage. Unlike larger units, this power supply lacks extra cables for expansion. It is best suited for basic office PCs or light media centers. Regularly check the 40mm fan for dust buildup to maintain thermal speed control. Keep the area around the vents clear for proper airflow.
Check before you buy
- Verify your case fits 5.91 x 3.21 x 1.59 inches
- Confirm your system draws less than 300W total
- Check motherboard compatibility with 20+4 and 4+4 connectors
- Ensure you have enough SATA or Molex cables for drives
- Set the voltage switch to 230V if outside North America
The product at a glance
Apevia 300W Mini-ITX Power Supply
Best for: compact Mini-ITX and Flex-ATX builds
- Wattage
- 300W
- Form Factor
- ATX
- Dimensions
- 5.91 × 1.59 × 3.21 inches
View on Amazon: Apevia 300W Mini-ITX Power Supply Affiliate link
The Apevia ITX-AP300W is a compact 300W power supply designed for Mini-ITX and Flex-ATX cases. It measures 5.9 x 3.21 x 1.59 inches, fitting standard small form factor builds. The unit includes a 20/24-pin main connector and an 8-pin CPU connector, both separable for legacy support. It features a 40mm fan with thermal control and essential safety protections like OVP and OCP. This unit requires a full motherboard connection to start.
Pros
- Compact dimensions fit Mini-ITX and 1U cases
- Separable 20+4 and 4+4 connectors support legacy boards
- Includes OVP, OCP, and SCP safety protections
- Factory preset to 115V for North American use
Cons
- Small 40mm fan may generate more noise under load
- Manual voltage switch requires setting to 230V for international use
- Unit will not spin if only connected to a wall outlet
Good fit if
- You are building a compact HTPC or SFF system
- You need a power supply for a 1U server chassis
- You require support for legacy motherboards with 20-pin connectors
Skip if
- You need more than 300W of power for your components
- You are building a standard ATX mid-tower case
- You want a fully modular cable setup
Verdict: Apevia 300W Mini-ITX Power Supply is a specialized unit for tight spaces. It fits users who prioritize physical size over high wattage or modern modular convenience.
Specifications side by side
| Spec | Apevia 300W Mini-ITX Power Supply |
|---|---|
| Wattage | 300W |
| Form Factor | ATX |
| Dimensions | 5.91 × 1.59 × 3.21 inches |
| Model | ITX-AP300W |
Frequently asked questions
Is the Apevia ITX-AP300W compatible with standard ATX cases?
No, this unit is designed specifically for Mini-ITX and Flex-ATX builds. Its compact dimensions make it unsuitable for full-size ATX chassis. You should verify your case supports this smaller form factor before installation to ensure proper fit and airflow.
What are the exact physical dimensions of this power supply?
The Apevia ITX-AP300W measures 5.91 inches in length, 3.21 inches in height, and 1.59 inches in width. These tight measurements allow it to fit into small form factor cases where standard ATX units would not fit. Check your case clearance carefully.
Does this power supply support high-end gaming builds?
No, the 300W output is insufficient for high-end gaming systems. This wattage is intended for low-power configurations like basic office PCs or light media centers. You should choose a higher wattage unit if you plan to install discrete graphics cards or powerful CPUs.
Is the fan noise level high during operation?
The unit features a 40mm fan that keeps noise levels manageable. This small fan size is typical for compact power supplies and helps maintain a quiet environment. It is suitable for users who prioritize silence in tight spaces over raw power output.
Can I use this PSU in a 1U server chassis?
Yes, the listing describes this unit as built for 1U cases. Its small footprint allows it to fit into these specialized server enclosures. Ensure your 1U case supports the specific mounting holes and connector layout required for this Mini-ITX form factor.
Does this model include modular cabling for easier installation?
This unit prioritizes physical size over modern modular convenience. It is a specialized unit for tight spaces rather than a fully modular design. You will need to manage the fixed cables within your small chassis, so plan your cable routing carefully during setup.