Aukuoy PCIe Cable 8 Pin Review: Specs, Pros and Cons

What stands out

• 18AWG tinned copper cores for superior durability and heat resistance
• 65cm length simplifies cable management in mid-tower cases
• Supports up to 10A per wire for stable power under high loads
• Flat PVC wire design reduces bulk and improves airflow

Who it fits

Key specs explained for this cable

18AWG tinned copper cores

This gauge indicates the thickness of the internal wire. A lower number means a thicker wire, which reduces electrical resistance and heat buildup. Tinned copper resists corrosion better than bare copper. You benefit from stable power delivery to your GPU under heavy loads. When shopping, compare this to thinner 20AWG or 22AWG cables found in cheaper extensions, which may overheat.

65cm length

This is the total distance from the PSU connector to the GPU connector. It provides enough slack to route cables neatly behind a motherboard tray without stretching tight. This length is ideal for mid-tower cases. If you have a large case with a deep PSU shroud, this might be short. Check your case dimensions before buying to ensure it reaches your GPU without strain.

10A per wire support

This rating shows how much current each wire can safely carry. It ensures the cable handles the power demands of modern graphics cards without melting or degrading. This is crucial for high-end GPUs that draw significant power. When comparing products, look for similar or higher amperage ratings. Cables with lower ratings may fail under sustained gaming or rendering workloads.

6+2 pin configuration

This refers to the connector shape on the GPU side. It combines a 6-pin and a 2-pin block to form an 8-pin connector. This design ensures compatibility with both older 6-pin and newer 8-pin GPU slots. You simply plug it in, and the extra two pins connect only if needed. This standardizes the connection for most modern PCIe power supplies and graphics cards.

PVC flat wire

The insulation material and shape are specified here. Flat wires are easier to route through tight spaces and bundle together than round cables. PVC insulation provides heat resistance and durability. This helps with cable management, keeping your build looking clean. When comparing, note that round cables can be bulkier. Flat designs are often preferred for smaller cases or strict aesthetic builds.

Design and build specs

The listing describes the Aukuoy PCIe cable as a flat, modular extension built for specific high-end power supplies. It uses 18AWG tinned copper cores encased in PVC flat wire. According to the listing, this construction provides superior durability and heat-resistant insulation. The 18AWG gauge allows each wire to support up to 10A, which helps maintain stable power under high loads. You avoid the bulk of round cables, which simplifies cable management inside mid-tower cases.

The cable measures 65cm, or 2.13 feet, in length. The flat profile is approximately 0.5 inches wide and thick, with the connector housing extending about 1 inch. This specific size ensures it fits neatly behind motherboard trays without obstructing airflow or component installation. The 65cm reach is sufficient for most standard builds, bridging the gap between the PSU and GPU without excess slack.

It features an 8-pin male end for the PSU and a 6+2-pin female end for the GPU. The 6+2 design ensures compatibility with both older 8-pin and newer 12-pin standards by allowing the extra two pins to attach when needed. You must plug the 8-pin end into your modular PSU and the 6+2-pin end into the graphics card, not the motherboard. This straightforward layout eliminates compatibility gaps for supported Corsair, Thermaltake, and ARESGAME units.

Setup and everyday use

Setting up this Aukuoy PCIe cable is a straightforward two-step process that requires no special tools. First, you plug the 8-pin male connector into the corresponding outlet on your modular power supply. Second, you connect the 6+2-pin female end directly to your graphics card. It is critical to ensure you do not connect this cable to the motherboard, as it is designed exclusively for GPU power delivery. The 6+2-pin design ensures a secure fit on modern graphics cards that utilize an 8-pin power interface. The 65cm length provides enough slack to reach your GPU comfortably within a mid-tower case, simplifying cable management by allowing you to route the wire neatly along the case frame. This specific length helps avoid excessive bunching of cables behind the motherboard tray.

Regarding compatibility, this cable is not universal. It is explicitly listed as suitable for a wide range of Corsair PSUs, including the AX, HX, RM, SF, and CS-M series. It also works with Thermaltake models like the Toughpower TF1, GF1, PF1, and SFX series, as well as ARESGAME units such as the AGK750 and AGS850. You must verify your specific PSU model against the provided list, as it is not compatible with Corsair AX1200, AX Gold, or HX Bronze/White models. Once connected, the 18AWG tinned copper cores and heat-resistant insulation support up to 10A per wire. This specification suggests the cable can handle high power loads without significant voltage drop or overheating, providing stable power to your graphics card during everyday use.

Check Compatibility Before You Buy

Before purchasing this Aukuoy PCIe cable, you must verify that your power supply is on the supported list. The listing explicitly excludes Corsair AX1200, AX(GOLD), HX(BRONZE/WHITE), and non-listed brands. It works with specific Corsair AX, HXi, HX, RMi, RMX, RM, SF, CS-M, and TX-M models. It also supports Thermaltake RGB GOLD, PLATINUM, ARGB GOLD, and Toughpower series. ARESGAME AGK and AGS models are also compatible. You need to ensure your PSU uses modular connectors that match the 8-pin male end. This extension is not a standalone power source; it relies entirely on your existing unit. You should also consider cable management tools like velcro straps or sleeves, as the flat design helps but does not eliminate clutter. This cable fits into the broader category of PSU accessories. It complements standard power supplies by extending reach or improving aesthetics in mid-tower cases. It is a specialized component for specific builds, not a universal solution. Always double-check your PSU model against the provided list to avoid connection issues.

Check before you buy

• Confirm your PSU model is on the supported list.
• Verify your PSU uses modular 8-pin connectors.
• Check that your case has space for the 65cm length.
• Ensure your GPU accepts the 6+2-pin connector.

The product at a glance

1

Aukuoy 65cm 18AWG PCIe 8-Pin Cable

Best for: compatible modular PSU users needing stable GPU power

Dimensions

1 × 0.5 × 0.5 inches

View on Amazon: Aukuoy 65cm 18AWG PCIe 8-Pin Cable Affiliate link

The Aukuoy PC060 is a 65cm modular extension cable designed for specific Corsair, Thermaltake, and ARESGAME power supplies. It uses 18AWG tinned copper cores to support up to 10A per wire, ensuring stable power delivery to your GPU. The flat PVC design aids cable management in mid-tower cases. You should choose this if you need a reliable connection for compatible high-end PSUs without dealing with messy wiring.

Pros

• 18AWG tinned copper cores for durability
• Supports up to 10A per wire
• Flat PVC design simplifies cable management
• Compatible with specific Corsair, Thermaltake, and ARESGAME models

Cons

• Limited compatibility excludes many non-listed brands
• Not compatible with Corsair AX1200 or AX Gold
• Short 65cm length may not suit all builds

Good fit if

• You own a compatible Corsair, Thermaltake, or ARESGAME PSU
• You need a reliable 8-pin to 6+2-pin extension
• You want flat cables for better case airflow

Skip if

• You have a Corsair AX1200 or AX Gold PSU
• You need a cable longer than 65cm
• You use a PSU brand not listed in the specs

Verdict: Aukuoy 65cm 18AWG PCIe 8-Pin Cable fits users with compatible modular PSUs who need a sturdy, flat extension for stable GPU power delivery.

Specifications side by side

Frequently asked questions

See also

• jeyi pcie 5 0 riser cable review
• btfo 4 pin bus cable bambu review