CyberPower or APC? UPS Battery Backups Compared in 2026
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This CyberPower vs APC uninterruptible power supply comparison helps you choose between two reliable brands. Both units protect your electronics from surges and outages. They both feature LCD screens for status monitoring. The main difference lies in their power output and waveform type. CyberPower offers higher wattage with a simulated sine wave. APC provides a pure sine wave output for sensitive gear. You need to match these specs to your device requirements.
Key differences
| Aspect | CyberPower 1500VA UPS with LCD | APC 1350VA Pure Sine Wave UPS |
|---|---|---|
| Output Wattage | 900W | 810W |
| Waveform | Simulated Sine Wave | Pure Sine Wave |
| Total Outlets | 12 | 10 |
| USB Charging | Not listed | USB-C and USB-A ports |
Which one should you choose?
Choose CyberPower 1500VA UPS with LCD if
- You need to power more than ten devices simultaneously.
- Your equipment works well with simulated sine wave output.
- You want a higher total wattage capacity for your setup.
Choose APC 1350VA Pure Sine Wave UPS if
- You run sensitive electronics that require pure sine wave power.
- You want built-in USB charging for mobile devices.
- You value user-replaceable batteries for long-term maintenance.
Verdict: Choose the CyberPower model if you prioritize higher wattage and more outlets for general home office gear. Pick the APC unit if your devices demand clean pure sine wave power or if you need convenient USB charging. Both models provide solid protection, so your choice depends on specific device compatibility.
CyberPower vs APC UPS Comparison
output waveform
The APC BR1350MS delivers a pure sine wave output, which mimics utility electricity. This clean power ensures sensitive components run cooler and last longer, protecting expensive hardware from damage. In contrast, the CyberPower CP1500AVRLCD uses a simulated sine wave. While this is sufficient for workstations and networking devices, it does not provide the same level of electrical purity as the APC unit. If your equipment requires strict waveform fidelity, the APC design is the more robust choice for long-term device health.
power capacity
CyberPower offers a higher apparent power rating of 1500VA compared to the APC unit at 1350VA. The CyberPower model also provides 900W of output wattage, whereas the APC delivers 810W. This extra capacity allows the CyberPower unit to support a slightly heavier load of connected devices. If you plan to power multiple high-draw components, the higher VA and wattage numbers on the CyberPower unit provide more headroom. The APC unit is rated for 1350VA, which is still substantial but lower than the competitor.
outlet count
The CyberPower CP1500AVRLCD includes twelve total outlets, split between six battery backup outlets and six surge-only outlets. The APC BR1350MS provides ten total outlets, with six battery backup outlets and four surge-only outlets. Both units offer six battery-backed connections for essential devices. However, the CyberPower unit gives you two additional surge-protected sockets for peripherals. If you need to plug in more devices without using extension cords, the CyberPower layout offers greater flexibility with its extra outlets.
charging ports
The APC BR1350MS features built-in USB-C and USB-A ports that share a 5V/3A output for charging phones and tablets. This allows you to charge everyday devices directly without extra adapters. The CyberPower CP1500AVRLCD data does not list any integrated USB charging ports. If you want to keep your mobile devices powered during an outage using the UPS itself, the APC unit includes this convenience. You would need to rely on separate chargers or a different power source with the CyberPower model.
surge protection
The APC BR1350MS includes built-in coaxial and Ethernet surge protection, adding an extra layer of security for your network connections. This helps protect against voltage spikes traveling through internet or cable lines. The CyberPower CP1500AVRLCD data does not mention specific network line surge protection. Both units protect your electronics from power surges via their outlets. However, the APC unit offers comprehensive protection that extends to your data lines, which is valuable for home office setups with connected routers and modems.
Which UPS fits your setup?
You need maximum runtime for heavy loads
The CyberPower unit offers 1500VA and 900W of output capacity. This higher wattage supports more devices or power-hungry equipment than the APC alternative. It includes 12 total outlets, providing six battery-backed connections. The automatic voltage regulation helps extend battery life by correcting minor fluctuations without draining the battery.
You have sensitive electronics requiring clean power
The APC BR1350MS delivers a pure sine wave output. This waveform mimics utility electricity, ensuring sensitive components run cooler and last longer. It is ideal for expensive hardware that may be damaged by simulated sine waves. The unit also includes built-in coaxial and Ethernet surge protection for comprehensive connectivity safety.
You want to charge mobile devices directly
This APC model includes built-in USB-C and USB-A ports. These ports provide 5V/3A shared power for fast charging phones and tablets. You do not need extra adapters for everyday devices. The real-time LCD display also shows remaining runtime and power load, helping you manage energy usage during outages.
The products compared
CyberPower 1500VA UPS with LCD
Best for: Workstations needing six battery outlets
- Apparent Power
- 1500VA
- Output Wattage
- 900W
- Output Waveform
- Simulated Sine Wave
- Total Outlets
- 12
- Form Factor
- Mini-Tower
- Input Plug Type
- NEMA 5-15P
View on Amazon: CyberPower 1500VA UPS with LCD Affiliate link
The CyberPower CP1500AVRLCD is a 1500VA/900W uninterruptible power supply designed for workstations and networking gear. It features twelve NEMA 5-15R outlets, with six providing battery backup and surge protection. An intelligent LCD panel displays runtime, battery capacity, and load data. Automatic voltage regulation corrects minor fluctuations to extend battery life. This unit suits users needing detailed power monitoring for home entertainment or office equipment.
Pros
- 1500VA/900W capacity for workstations
- Twelve NEMA 5-15R outlets
- Six outlets with battery backup
- Multifunction LCD status panel
- Automatic voltage regulation
Cons
- Simulated sine wave output
- 25-pound weight
- No app control mentioned
Good fit if
- You need six battery-backed outlets
- You want detailed LCD power data
- You run networking or home entertainment gear
Skip if
- You require pure sine wave output
- You need mobile app management
- You prefer a lighter unit
Verdict: CyberPower 1500VA LCD UPS provides ample outlets and clear status monitoring for standard electronics. It is a solid choice for users who prioritize visible power metrics over pure sine wave output.
APC 1350VA Pure Sine Wave UPS
Best for: home office electronics protection
- Apparent Power
- 1350VA
- Output Wattage
- 810W
- Output Waveform
- Pure Sine Wave
- Total Outlets
- 10
- Voltage Regulation
- AVR
- Recommended Use
- Home Office
View on Amazon: APC 1350VA Pure Sine Wave UPS Affiliate link
The APC BR1350MS is a 1350VA/810W uninterruptible power supply designed for home office setups. It delivers pure sine wave output, which protects sensitive electronics from damage during outages. The unit includes ten protected outlets and built-in coaxial surge protection. You get up to 54 minutes of runtime at 100W. An LCD screen shows real-time status, and USB ports allow for device charging.
Pros
- 1350VA apparent power with 810W output capacity
- Pure sine wave output for sensitive hardware
- Ten outlets including six battery-backed and four surge-only
- Built-in USB-C and USB-A charging ports
- LCD display showing load and runtime
Cons
- 25.7 pounds weight makes it heavy to move
- Battery is user-replaceable but sold separately
- No app control or remote management features
Good fit if
- You need pure sine wave power for sensitive electronics
- You want multiple outlets for a full home office setup
- You prefer real-time status monitoring via an LCD screen
Skip if
- You need app-based remote management
- You require a lighter or more compact unit
- You want a battery included in the box
Verdict: APC BR1350MS 1350VA Pure Sine Wave UPS suits users who need reliable, clean power for sensitive home office equipment. Its pure sine wave output and ten-outlet configuration make it a solid choice for protecting computers and networking gear during outages.
Specifications side by side
| Spec | CyberPower 1500VA UPS with LCD | APC 1350VA Pure Sine Wave UPS |
|---|---|---|
| Apparent Power | 1500VA | 1350VA |
| Output Wattage | 900W | 810W |
| Output Waveform | Simulated Sine Wave | Pure Sine Wave |
| Total Outlets | 12 | 10 |
| Form Factor | Mini-Tower | not stated |
| Input Plug Type | NEMA 5-15P | not stated |
| Waveform | not stated | Pure Sine Wave |
| Voltage Regulation | AVR | AVR |
| Recommended Use | not stated | Home Office |
| Size | 1500VA | 1350VA |
| Outlets | 12 Outlets | not stated |
| Device Compatibility | not stated | PCs |
| Certification | UL Certified | not stated |
| Display Type | LCD Display | not stated |
| Dimensions | 13.3 × 4 × 9.75 inches | 14.5 × 3.9 × 10.2 inches |
| Weight | 25 pounds | 25.7 pounds |
| Color | Black | Black |
| Model | CP1500AVRLCD | BR1350MS |
Frequently asked questions
Which UPS is better for sensitive home office equipment?
The APC BR1350MS is the better choice for sensitive electronics. It delivers a pure sine wave output, which mimics utility electricity. This clean power helps sensitive components run cooler and last longer. It protects expensive hardware from potential damage during outages. The CyberPower unit uses a simulated sine wave, which may not be ideal for all sensitive devices.
Do both brands offer LCD displays for monitoring?
Yes, both the CyberPower and APC models feature LCD screens. These displays allow you to monitor power status and metrics clearly. The CyberPower 1500VA unit includes an LCD display for visible power metrics. The APC BR1350MS also provides status monitoring through its interface. This feature helps you stay informed about your power supply conditions.
Which model has more battery-backed outlets?
The CyberPower 1500VA UPS provides six battery-backed outlets. It includes 12 total outlets for your convenience. This configuration is ideal for workstations needing multiple protected connections. The APC BR1350MS offers ten outlets in total. However, the CyberPower unit specifically prioritizes battery-backed connections for critical devices.
Is there a difference in physical size between the two?
The dimensions vary slightly between the two units. The CyberPower model measures 4 inches wide, 9.75 inches high, and 13.3 inches long. The APC unit is 3.9 inches wide, 10.2 inches high, and 14.5 inches long. Both are relatively compact for their capacity. You can choose based on your available desk or rack space.
Which UPS weighs more?
The APC BR1350MS is slightly heavier. It weighs 25.7 pounds. The CyberPower 1500VA UPS weighs 25 pounds. The difference is minimal and unlikely to affect placement. Both units are substantial enough to provide stable power backup. You do not need to worry about significant weight differences when installing them.
Which model offers higher wattage capacity?
The CyberPower 1500VA UPS offers 900W of output capacity. This higher wattage supports more devices or power-hungery equipment. The APC BR1350MS is rated at 1350VA. While VA ratings differ, the CyberPower unit provides ample power for standard electronics. It is a solid choice if you need to run multiple high-draw devices simultaneously.