GinTai Y Splitter Power Supply Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This gintai y splitter power supply review examines the GinTai 24-Pin Y Splitter Cable. It is an extension cable designed for ATX motherboards, converting one 24-pin female connector into two male connectors. This allows you to power a single motherboard from two different power supply units. The cable is built with 18AWG pure copper conductors to ensure stable power delivery and low resistance. It features a flexible, heat-resistant PVC jacket for easy routing inside your PC case. The unit measures 23.5cm in length and comes in blue. It is a practical solution for dual PSU setups.
What stands out
- Dual 24-pin output for splitting ATX power
- 18AWG pure copper conductors for low resistance
- 23.5cm length for flexible cable management
- Heat-resistant PVC jacket for durability
Who it fits
Good fit for
This cable suits builders who are setting up dual power supply systems. You need this if your motherboard requires more power than one unit can provide or if you are using multiple GPUs. The 18AWG copper wires help maintain stable voltage across the split connection. The flexible jacket makes it easier to route cables in tight cases. It is ideal for enthusiasts who want redundancy or higher power capacity from separate PSUs.
Who should skip it
You should look at another option if you are using a single standard power supply. This cable splits one connection into two, which is not needed for typical single-PSU builds. It also requires special skill for proper installation. If you are not comfortable with electrical connections or modifying your power setup, this may not be for you. The seller advises replacing it in an off state, so ensure you are prepared for that safety step.
Verdict: The GinTai Y Splitter is a spec-focused tool for dual PSU enthusiasts. It provides a clear path for splitting ATX power with durable 18AWG wiring.
Key specs explained
18AWG Copper Wires
The cable uses 18-gauge pure copper conductors. This thicker wire reduces electrical resistance and minimizes voltage drop over the 23.5cm length. You get more stable power delivery to your motherboard. This is safer for high-draw components than thinner cables. When shopping, check wire gauge to ensure reliable performance under load without excessive heat buildup.
ATX Form Factor
This splitter is designed specifically for standard ATX motherboards. It connects to the primary 24-pin power connector. Ensure your motherboard uses this standard layout before purchasing. It does not fit older 20-pin only boards without an adapter. Verify your board’s socket type matches this specification to avoid compatibility issues during installation.
PVC Jacket
The outer casing is made of soft, heat-resistant PVC. This material allows for flexible routing inside your PC case. It resists bending and wear during cable management. You can easily tuck it away without kinking. Look for this feature to ensure the cable fits neatly in tight spaces while protecting the internal wires from damage.
23.5cm Length
The cable measures 23.5 centimeters in total length. This size is sufficient for short-distance connections between the power supply and motherboard. It helps reduce clutter by avoiding excess slack. Measure your case’s internal distance before buying. A shorter cable may not reach, while a longer one might create unnecessary loops that hinder airflow.
Design and Build Quality
The listing describes the cable jacket as soft, heat-resistant PVC. This material choice makes the 23.5cm length flexible for easy routing inside a PC case. You can bend it around other components without kinking. The jacket is also wear-resistant, which helps with long-term durability during cable management. The conductors are pure copper. According to the listing, these are 18AWG wires. This gauge provides stable power delivery and low resistance. It reduces voltage drop over the short distance between your PSU and motherboard.
The cable is blue in color. This specific shade may help you identify the splitter in a busy build. The model number is NB4038-1. It fits the standard ATX form factor. The 24-pin interface converts one female port into two male ports. This layout allows you to split power from a single PSU unit. The design is simple, with no complex controls or additional displays. You rely on the physical connections for stability.
Installation requires special skill. The listing advises checking the model and picture before purchase. You must replace the cable while the system is off. The soft jacket aids in fitting tight spaces, but the heavy-duty copper ensures safety. This combination supports reliable operation for your motherboard components. The build focuses on function over form. You get a straightforward extension that prioritizes electrical integrity and ease of use within standard ATX cases.
Setup and everyday use
Installation requires careful attention to detail. The listing notes that special skills and techniques are needed for proper setup. You must ensure your computer is powered off before connecting the cable. This safety step prevents electrical damage during the split. The cable converts one 24-pin female port into two male connectors. This allows you to draw power from two separate PSUs or a single unit with dual outputs. Before purchasing, verify the model and picture match your motherboard’s ATX 24-pin connector. The 23.5cm length provides enough reach for typical case layouts. The 18AWG pure copper conductors ensure stable power delivery. This reduces voltage drop, which is critical for maintaining system stability under load. The soft PVC jacket offers flexibility. You can route the cable easily around other components without kinking. The heat-resistant material helps protect the wires from internal case temperatures. This durability supports long-term service life. The wear-resistant jacket also withstands friction against other cables or case edges. Daily use relies on this stable connection. The thicker wires handle current with lower resistance. This minimizes the risk of power fluctuations that could affect motherboard performance. The blue color helps you identify the cable quickly during maintenance. The design supports easy replacement if the original cable becomes cracked or broken. Just ensure you disconnect power before swapping it out. The ATX form factor ensures compatibility with standard motherboards. You get a reliable extension that simplifies complex power setups. The straightforward design means fewer points of failure. This makes it a practical choice for users who need to split their 24-pin power connection. The specifications focus on safety and stability. You do not need extra software or tools to operate it. It is a passive component that works as soon as it is securely plugged in.
Before You Buy This Splitter
You should verify your power supply unit (PSU) has two available 24-pin connectors before purchasing. This GinTai cable splits one input into two outputs, so it only works if your PSU can physically support this configuration. You must also confirm your motherboard accepts a 24-pin ATX connection, specifically the 20+4 pin variant listed in the features. The 23.5cm length offers limited reach, so check your case layout to ensure it reaches from the PSU to the motherboard without strain. Since the listing warns that special skills are needed for installation, you may need additional cable management tools to keep the split wires tidy. Regularly inspect the 18AWG copper wires and PVC jacket for wear, especially if you move your PC often. This splitter fits best as a niche solution for users with specific dual-PSU setups, rather than a standard upgrade for typical single-PSU builds. It complements other options by offering a simple hardware fix for specific power routing needs.
Check before you buy
- Confirm your PSU has two free 24-pin connectors.
- Check that your motherboard uses a 20+4 pin ATX socket.
- Ensure the 23.5cm length reaches your motherboard comfortably.
- Verify you have the skills for safe installation.
The product at a glance
GinTai 24-Pin Y Splitter Cable
Best for: splitting single ATX power cables
- Form Factor
- ATX
View on Amazon: GinTai 24-Pin Y Splitter Cable Affiliate link
This GinTai Y splitter splits one 24-pin ATX power connector into two ports. It uses 18AWG pure copper wires to reduce resistance and voltage drop. The blue PVC jacket is heat-resistant and flexible for easy routing. At 23.5 cm, it fits standard cases. You need this if your motherboard requires dual power inputs but your PSU has only one cable.
Pros
- 18AWG pure copper conductors for stable power delivery
- Flexible heat-resistant PVC jacket for easy routing
- Splits one 24-pin ATX connector to two ports
- Blue color for easy identification
Cons
- Only includes one cable, not a full dual PSU setup
- Requires specific installation skills and techniques
- Must be installed while the system is powered off
Good fit if
- You have a motherboard requiring dual 24-pin power connections
- You only have one 24-pin cable from your power supply
- You need a flexible cable for tight case routing
Skip if
- Your motherboard only requires a single 24-pin connection
- You are looking for a complete dual power supply unit
- You want a plug-and-play solution without installation skills
Verdict: GinTai ATX 24-Pin Y Splitter works for systems needing dual power feeds from a single cable. It suits builders who can handle careful installation and need flexible routing.
Specifications side by side
| Spec | GinTai 24-Pin Y Splitter Cable |
|---|---|
| Form Factor | ATX |
| Size | 23.5cm |
| Color | Blue |
| Model | NB4038-1 |
Frequently asked questions
Does the GinTai Y splitter work with any ATX motherboard?
Yes, it is designed for standard ATX form factors. The cable splits a single 24-pin female connector into two male connectors. This allows you to power a motherboard that requires dual feeds from one cable. Verify your specific board needs this configuration before use.
What is the length of the GinTai NB4038-1 cable?
The cable measures 23.5cm in length. This size provides enough reach for routing inside most PC cases. The length helps manage cable clutter while keeping connections secure. It is not an excessively long extension, which reduces voltage drop risks.
Is the GinTai splitter blue or black?
The listed color for this model is blue. This visual distinction helps you identify the cable during installation. It stands out against typical black PC internals. The jacket material is heat-resistant PVC, which complements the blue coloring.
Can I use this cable to power two different motherboards?
No, it is designed for a single motherboard. The device converts one input into two outputs for one ATX board. It does not split power between two separate systems. You must ensure your PSU has two available connectors for this single setup.
What model number is this GinTai splitter?
The model number is NB4038-1. This identifier helps you find the correct replacement or verify compatibility. It corresponds to the 24-pin ATY Y-splitter design. Always check this number when comparing specifications with other cables.
Do I need special tools to install this splitter?
No special tools are required, but careful handling is necessary. The listing notes that special skills and techniques are needed for proper setup. You must ensure the computer is powered off before connecting. Proper alignment of the pins is critical for safe operation.
Is the cable jacket durable for long-term use?
Yes, the jacket is made of wear-resistant PVC. This material choice supports long-term durability during installation and use. It is also heat-resistant, protecting the wires inside. The soft texture makes it flexible for easy routing around other components.