YEZriler 8 Pin PCIe Cable Review: Specs, Pros and Cons

What stands out

• Converts ATX 8-pin PSU output to dual PCIe 8-pin (6+2) connectors
• Total length of 25 inches plus 9 inches for flexible routing
• Uses 18AWG tin-coated copper wire for reliable power delivery
• Includes one hook loop strip for cable management
• Compatible with specific Corsair RM, RMX, HX, and other series PSUs

Who it fits

Key Specs Explained

Length: 25-inch + 9-inch

This cable splits into two distinct segments. The longer 25-inch section connects to your power supply, while the 9-inch section reaches your graphics card. This total length provides enough slack for clean cable management inside your case. You can route the wires without tension. It suits builds where your GPU sits lower or further from the PSU than standard cables allow.

Gauge: 1007-18AWG

The wire gauge indicates the thickness of the copper conductors. An 18AWG rating is standard for this type of adapter. It ensures reliable power delivery to your graphics card without excessive resistance. You do not need to worry about voltage drop over this distance. It matches typical internal cable standards found in most modern PC power supplies and modular cables.

Connector: ATX 8 pin male

The end that plugs into your power supply is an ATX 8-pin connector, not a PCIe 8-pin. This distinction is critical for compatibility. You must ensure your power supply uses ATX 8-pin modular cables. This adapter does not work with standard PCIe cables from other brands. Always verify your PSU cable type before connecting to avoid damage or poor contact.

Output: Dual PCIe 8 pin (6+2)

The output side features two connectors that can function as either 6-pin or 8-pin. You can slide the extra two pins on or off. This flexibility allows you to connect to various graphics card models. It supports both high-end cards requiring full 8-pin power and mid-range cards using 6-pin connectors. This design reduces the need for multiple specific adapters.

Weight: 2.84 ounces

The cable assembly weighs just under three ounces. This light weight adds minimal burden to your cable routing. It is easy to handle during installation. The light build suggests standard materials without excessive shielding or heavy connectors. You can manage the cables easily without worrying about sagging or adding significant weight to your PSU bracket.

Build Quality and Physical Layout

The cable uses standard tin-coated copper wire rated at 18AWG under the 1007 specification. This gauge handles the power delivery required for modern graphics cards without excessive voltage drop. The listing notes that the connectors are not interchangeable. The ATX 8-pin male end plugs into the power supply, while the dual PCIe 8-pin (6+2) ends connect to your GPU. You must keep these ends distinct to avoid damaging your hardware.

Length is specified as 25 inches plus 9 inches, totaling 63 centimeters and 23 centimeters respectively. This split design allows the main segment to reach from the PSU while the shorter branch connects directly to the card. The total weight is 2.84 ounces. This light weight means the cable adds minimal strain to your GPU’s PCIe slot, which is important for heavy graphics cards. A single hook loop strip is included for cable management.

According to the listing, the finish is sleeved for aesthetics and protection. The dual 8-pin (6+2) design offers flexibility, as you can slide off the extra two pins to use the connector as a 6-pin if your card requires it. This adaptability ensures compatibility with various GPU models from manufacturers like ASUS, Gigabyte, and NVIDIA. The build focuses on reliable power transfer for the specific Corsair PSU models listed, ensuring a stable connection for your video card.

Setup And Daily Use Guide

Setting up this adapter requires careful attention to connector types. The ATX 8-pin male end plugs directly into compatible Corsair power supplies. You must verify your unit matches the listed models, such as the RM, RMX, or HX series. Do not attempt to use this cable with EVGA or Seasonic units, as this risks hardware damage. The other end features dual PCIe 8-pin (6+2) connectors. These slide onto your graphics card. You can remove the extra two pins to use them as standard 6-pin connectors if your card requires that configuration. The two PCIe ends are not interchangeable with the PSU end. During daily use, the 25-inch and 9-inch segments provide necessary reach. This length allows you to route cables cleanly without straining connectors. The included hook loop strip helps secure the cable bundle, keeping your case interior organized. The 18AWG copper wire ensures stable power delivery to high-end GPUs. You should check compatibility before purchase. Using an unsupported power supply will likely burn or damage your components. The cable is designed strictly for graphics cards and will not work with motherboards. If you are unsure about your PSU model, contact the manufacturer for confirmation. Proper installation ensures reliable performance and protects your expensive hardware from electrical faults. Always double-check the connector orientation and compatibility list before connecting power.

Before you buy this cable

You need to verify your power supply model before ordering. This adapter only works with specific Corsair series like RM, RMX, HX, and CX. It does not support AX1200, EVGA, or Seasonic units. Using it with incompatible PSUs can damage your hardware. Check the connector type carefully. The input is an ATX 8-pin male, not a PCIe 8-pin. The output splits into two PCIe 8-pin (6+2) connectors for your graphics card. You should also check your case space. The 25-inch plus 9-inch length helps with routing, but ensure you have enough room. Keep the included hook loop strip handy for cable management. This cable fits into the broader PC Power Supplies & UPS category as a specialized solution for users with specific Corsair units who need extra GPU power connectors. It is not a general-purpose adapter. Always double-check compatibility lists to avoid electrical issues.

Check before you buy

• Confirm your PSU is a compatible Corsair series model.
• Verify the input connector is ATX 8-pin male.
• Ensure your GPU uses PCIe 8-pin power connectors.
• Check that your case has space for the cable length.

The product at a glance

1

YEZriler Dual 8-Pin PCIe Cable for Corsair PSUs

Best for: Corsair PSU owners upgrading GPU power connections

Form Factor

ATX

Weight

2.84 ounces

View on Amazon: YEZriler Dual 8-Pin PCIe Cable for Corsair PSUs Affiliate link

This adapter converts a Corsair ATX 8-pin power supply connector to dual PCIe 8-pin (6+2) connectors for graphics cards. The cable measures 25 inches plus 9 inches and uses 18AWG copper wire. It allows you to power modern GPUs from older or specific Corsair modular power supplies. You can slide the extra two pins to use the connector as a 6-pin if needed. It is designed strictly for video cards and does not work with motherboards.

Pros

• Converts ATX 8-pin PSU output to dual PCIe 8-pin connectors
• 25-inch plus 9-inch total length for flexible routing
• Compatible with major GPU brands like NVIDIA and ASUS
• Includes hook loop strip for cable management

Cons

• Limited to specific Corsair series; not compatible with EVGA or Seasonic
• Connectors are not interchangeable between the PSU and GPU ends
• Does not support the Corsair AX1200 model

Good fit if

• You own a compatible Corsair power supply and need to connect a modern graphics card
• You require a longer cable reach than standard modular cables provide
• You want to use the 8-pin connector as a 6-pin adapter

Skip if

• You use a power supply brand other than the listed Corsair series
• You need to power a motherboard CPU socket instead of a graphics card
• You own a Corsair AX1200 power supply

Verdict: YEZriler Dual 8-Pin PCIe Cable is a specialized adapter for owners of specific Corsair power supplies who need to connect modern graphics cards. It provides a reliable connection for compatible GPUs but requires strict adherence to the supported PSU list.

Specifications side by side

Frequently asked questions

See also

• yezriler 8 pin pcie cable alternatives
• yezriler dual 8 pin pcie cable vs 24 to 8 pin
• ldpcsj pcie 4 0 riser cable review
• btfo 4 pin bus cable bambu review